Metal Forming Department

• (1) 4 Ton Chambersburg Cecostamp Drop Hammer; Bed Size 66” x 60”
  
• (2) 3 ½ Ton Chambersburg Cecostamp Drop Hammers; Bed Size 66” x 48”
  
• (1) 2 ½ Ton Chambersburg Cecostamp Drop Hammer; Bed Size 48” x 48”
  
• (1) 2 Ton Chambersburg Cecostamp Drop Hammer; Bed Size 48” x 36”
  
• (1) 1 Ton Chambersburg Cecostamp Drop Hammer; Bed Size 30” x 24”
  
• (1) Mohawk 60 Ton Heated Platen Hot Size Press; Bed Size 34” x 34”
• (1) USI 75-Ton Hydraulic Press; Bed Size 48" x 48"; With Rubber Box
  
• (1) 200-Ton H-Frame Press; Bed Size 24" x 24"; With Rubber Box
  
• (1) 35-Ton H-Frame Hydraulic Press
  
• (4) Planishing Hammers
  
• (2) Libert Nibbler Hi-Speed Shears
  
• (1) 48” Slip Roll
  
• (1) 4 Ft. Power Shear (12 Ga.)
  
• (1) 8 Ft. Chicago Brake

Sheet Metal Fabrication Department

• (4) Router Work Stations
  
• (1) 2HP Turret Mill w/digital readout
  
• (2) Friction Band Saws
  
• (1) Pneumatic Rivet Squeezer
  
• (4) 1 ½” Burr King Belt Sanders
  
• (1) 4” Multi-position Belt Sander
  
• (2) Drill Presses
  
• (1) Duro Boring Machine
  
• (1) Nibbler
  
• (1) Pedestal Grinder/Deburr
  

Welding and Fitting Department

• (1) 12’ x 12’ Weld Booth with a Certified/Calibrated Miller 300 Amp Heliarc Welder and a precision steel table
  
• (1) 60” Throat DoAll Vertical Bandsaw
  
• (1) Combination Belt sander / disk sander
  
• (1) Expanding Mandrel 
  

Processing Equipment

• (1) Salt Bath Heat Treating Tank (8’ L x 3’ W x 5’ D) [6” Dia. Immersion Tube; Eclipse 20-IP Burner System, Blower/motor, Spark Ignition, Safety/control Valves, Air Flow Switch, Flame Safety Relay; Rated @ 500,000 Btu/hr.; Eclipse Digital Controller; Eclipse Hi-limit Controller; Eclipse Two Pen Circular Chart Recorder] 
  
• (1) Heat Treating Fresh Water Quench Tank (6’ L x 3’ W x 6’ D)
  
• (1) Hevi-Duty Furnace (Certified/Calibrated up to 1850 Deg F.) 
  
• (1) Despatch 3-Stage Aging Oven (Certified/Calibrated up to 1250 Deg F.)
  
• (1) Grieve Annealing Oven (to 850 Deg. F.)
  

Check and Straighten Department

• (1) Erco Metal Shrinker/Stretcher 
  
• (1) Planishing Hammer
  
• (1) Famco 3 ½ Ton Arbor Press
  
• (1) Precision Steel Table
  
• (1) Micro-Flat Granite Surface Table
  
• Miscellaneous dollies, vises, angle plates, and slappers
  

Foundry Equipment

• (1) Kirksite Melting Pot & Furnace
  
• (1) Lead Melting Pot & Furnace
  
• (2) Additional Melting Pots (Backup)
  
• (1) 7,500 lb. Bull Ladle
  
• (1) 400S Zinc Die Cast Portable Pump
• (1) 400L Lead Unit Portable Pump
• (1) Royer Sand Cutter
• (1) Bosch Tamping Hammer
• (1) Steel Lead-casting Platform
• (1) Overhead Crane

Die Grinding Department

• (2) Pedestal Flex-shaft Die Grinders
  
• (3) 7" Heavy Duty Die/Angle Grinders
  
• (2) A-Frames w/hoist
• Miscellaneous hand held tools and cutters
  

Support Equipment

• (1) Ingersoll-Rand 150 HP Rotary Screw Air Compressor
• (1) Ingersoll-Rand 125 HP Rotary Screw Air Compressor
• (1) Worthington 75 HP Rotary Screw Air Compressor
• (1) Atlas Copco 50 HP Air Compressor
• (1) 660 Gallon Air Receiving Tank
• (1) 300 Gallon Air Receiving Tank
• (2) 15,000 Lb. Capacity Clark Forklifts
• (2) 10,000 Lb. Capacity Clark Forklifts
• (1) 7,000 Lb. Capacity Clark Forklift
• (1) Thermal Dynamics Plasma Cutter
• (1) Abrasive Cut-Off Saw
• (1) Table Saw
• (1) Portable Lincoln Arc / Heliarc Welder
• (2) Oxygen / Acetylene Rigs
• (2) Granite Surface Tables
• (1) Kentrall Twin Hardness Tester
• (1) Hammond Radial Arm Drill
• (1) 10,000 Lb. Capacity Flatbed Trailer
• Miscellaneous Inspection Equipment; Portable Air Tools; Power Tools; Calibrated / Certified Freezers; Multi-Point Chart Recorders; 10 Networked Computer Workstations